Did you know that most home fires are the result of faulty electrical wiring? According to the U.S. Fire Administration, approximately 2,300 people are injured and close to 500 people Americans die in home fires each year that are directly or indirectly related to electrical problems. To make sure your home (and your family) is safe, schedule an inspection with a licensed residential electrician in San Jose . Also, be sure to leave all of your electrical and wiring needs to a professional electrician. You can also prevent a tragedy by avoiding or addressing these common electrical risks in your home.

Overloaded Electrical Outlets
Power strips can be a real lifesaver, but they can also be incredibly dangerous. According to statistics by the Consumer Product Safety Commission, overloaded outlets cause an estimated 5,300 house fires in the United States each year. If you have lots of electronics plugged into a single outlet, find another source of power before sparks start to fly.

DIY Electrical Wiring
If MacGyver taught us anything, it’s that duct tape and elbow grease can fix just about anything. Unfortunately, this is only true in television shows. You may think you’re prepared to tackle your home’s electrical needs, but all you’re really doing is putting yourself and your family at risk. No matter how small your wiring project is, hire a licensed electrician to make sure the work is done safely and correctly.

Outdated Breaker Panel
If your breaker box is more than ten years old, contact an electrician in San Jose about an upgrade. Old breaker panel are not designed to handle the number of high-voltage appliances and electronics commonly used in homes these days. Not only will an outdated breaker panel not supply you with the electricity you need to power all of your appliances and gadgets, but it might also start a fire if it becomes overloaded.

Small home improvement and repair projects are usually easy enough for the average do-it-yourselfer. However, there’s no such thing as a small project when it comes to your home’s electrical and wiring system. Working with electricity can be extremely dangerous, as even the slightest mistake can result in electrocution or lead to conditions which may result in an electrical fire. But as if safety wasn’t enough, there are actually lots more good reasons to hire a residential electrician in San Jose for your home’s rewiring project. Here are some of the most important.

Save Time
If your time is valuable, you can’t afford not to hire an electrician for your home rewiring project. Delta Electric can completely install new electrical wiring in a fraction of the time it would take on your own. Not only will this minimize the headache and frustration of having your home out of order, but it will also allow you to focus your energy elsewhere while a professional takes care of the electrical work.

Save Money
How could hiring an electrician possibly be less expensive than doing the work yourself? You may save on parts and labor by doing electrical work on your own, but you run the risk of paying a lot more when it’s discovered that you made a mistake. Even a minor error can require hundreds or even thousands of dollars in repairs, especially if that error lead to an electrical fire. Save your money and don’t take any chances; hire an electrician for all your electrical needs.

Stay Safe
Perhaps the most important reason to hire an electrician is the simple fact that working with electricity is incredibly dangerous. Handling your home’s electrical system should only be done by a trained, licensed, and experienced professional. Again, even the slightest error made on your own can result in tragedy.

Like most of the homes in San Jose, yours is probably full of outdated appliances and plumbing fixtures. But while some outdated features are only a problem aesthetically, others can be quite dangerous. Take outdated electrical panels, for example. Old breaker panels weren’t designed to handle the enormous voltage requirements of today’s high-powered appliances and consumer electronics. In addition to an inconsistent supply of electricity, your home’s outdated electric panel may also pose a fire hazard.

The best way to determine whether your home’s electric panel is adequate is to schedule an inspection with a licensed residential electrician in San Jose. A home electrician is a good contact to have regardless, since all of your home’s electrical needs should be left in the hands of experienced electrical technicians.

A functioning circuit breaker in San Jose will prevent your appliances from using a dangerous amount of energy, but it cannot perform this task unless all of its circuits are working. The good news is that fixing the problem is relatively simple and straightforward. Watch this video clip for tips on replacing a faulty circuit.

The first step in replacing a faulty circuit is locating the breaker box. Once you have found your breaker box, open it up and turn off the main; this is a very important step that should never be skipped over. Unscrew and remove the panel and loosen the screw that holds the wire, then remove the circuit breaker itself. Now you can simply insert the new circuit breaker and tighten the screws, put the lid back on, and turn on the main breaker. Your circuit breaker should now be functioning at optimal capacity once again.

It is tempting to become frustrated with your circuit breaker in San Jose if it continues to trip, but it helps to keep in mind that you are on the same team. Your breaker box can keep you safe in the event that your appliances attempt to draw too much power through your electrical system; instead of hazardous consequences like fires, your system will shut down and recover. Keep reading if you would like to find out why your circuits keep tripping.

Overload
Your circuits trip in order to prevent excessive amounts of electricity from flowing and creating too much energy, and in many cases this occurs when someone attempts to use too many appliances at the same time . It is important to note that circuits and outlets are different things; just because your appliances are plugged into different outlets does not mean that they are operating on different circuits. Always consider the amount of power that any given appliance uses, and make sure you do not attempt to use a variety of other appliances at the same time. Sometimes circuits will trip in this manner because of loose connections, but you should always have a licensed electrician address these issues.

Ground Fault
If you are not using too many appliances at the same time, your tripping circuit problem may have to do with a ground fault. When a hot wire touches a ground wire, a ground fault occurs; the same can happen when the hot wire touches a metal outlet box. Diagnosing this problem is simple, as all you have to do is make sure that the hot wire is not touching either of these other elements. A ground fault is one example of a short circuit.

Short Circuit
When a hot wire touches a ground wire or metal outlet box, a ground fault occurs; this is because whenever a hot wire touches a hot or neutral wire, a short circuit results. Short circuits tend to be more severe than circuit overloads and can involve melted cords, so in this case it is wise to have a professional electrician take a look at your electrical system.

While there are many household problems that you may be able to diagnose and handle yourself, others tend to indicate the presence of a much bigger problem on the horizon. If you notice any problems that relate to your electrical wiring or circuit breaker in San Jose, a call to your local electrician should be placed immediately. As handy as you may be, electrical problems may compromise the safety of your home. Read on for a look at some of the top reasons to call an electrician.

Moving Into or Out of a Home
Relocating to a new house or apartment can be a positive and exciting experience, but you will need to take care of some things before you can sit back and relax. When you put your home on the market, it is important to make sure that it is as safe as can be and perfectly suitable for a new family. This means that any outlets or fixtures that have given you trouble in the past should be taken care of before moving so that they do not cause problems for the new homeowners. If you are on the other side and you are the one looking for a home, hiring your own electrician to scope it out is never a bad idea.

Issues with Your Light Bulbs
Whether you are at home or in your office building, take a moment to consider the lighting. Do the lights flicker? Have you seen one or more bulbs pop? Are some bulbs brighter than other bulbs of the same quality? If these questions bring memories to mind, your electrical system may not be working properly, and it may be showing through your lights.

Malfunctioning Outlets
There is no reason to accept the fact that an outlet simply does not work; you paid for your home or office, so you paid for the electrical wiring inside of it. If your outlets do not work the way they should, call an electrician and have the problem addressed. Keep an eye out for appliances that malfunction after consistently being plugged into the same outlet as well.

Operating a business is not a simple task, which is why delegation is one of the most important skills a manager can have. If you would prefer to save your energy to use in conducting your business, you may want to consider hiring an electrician in San Jose to make sure that your electrical wiring is safe and secure. Here is a brief overview of a few reasons your business may need electrical services.

Accidents involving electrical equipment can lead to very severe damages and even death, so it is important to ensure that you are working in a safe environment. You can achieve this assurance by having a trained electrician regularly inspect your workplace and identify any potential hazards. Your electrician can also make sure that your electrical system is functioning as efficiently as it should be, which can result in financial savings. An electrician that you hire for a safety inspection can also determine whether your electrical system should be rewired, and he or she can complete that process as well. In the event that you decide to add on to your business by physically constructing new buildings, it is wise to consult an electrician when deciding where to situate outlets and lighting.

With the help of an electrician in San Jose , designing custom home lighting is easier than you think. LED home lighting is one of the most popular types of home lighting because it creates a crisp, energy-efficient glow that looks good in a variety of rooms. For tips on how to harness the benefits of LED home lighting, watch this video clip.

Custom LED home lighting can be used in the kitchen to highlight a backsplash, kitchen island, or countertop. At Delta Electric, we have also installed custom lighting to compliment a variety of artwork as well. Call us to find out how we can help you create a lighting design for your home.

It is easy to make a number of wiring mistakes that can lead short circuits, electrical shock, or even fire. The following article will review some of the common electrical wiring mistakes that can be avoided by adhering to professional electrician protocol. If you need help wiring your building, be sure to call a reliable commercial or residential electrician near San Jose .

Connecting to Outside Electrical Boxes
Always turn off the power at the main panel before working on electrical wiring . Avoid connecting wires outside of electrical boxes. If connections aren’t contained inside an electrical box, install one and connect the wires into it. Install the electrical box flush to the wall surface if the wall is made of combustible material. Cover the exposed combustible material with a box extension to prevent a potential fire hazard. Never overload a box with wires; install a larger box if needed.

Cutting the Wires Too Short
Wires that are too short make connections difficult and dangerous. The wires should protrude at least three inches from the box. An electrician can install a wire extension to your existing wires to strengthen the connection and make them safer.

Leaving Cables Unprotected
Never leave plastic-covered cable unprotected. If left exposed between framing members, plastic-sheathed cable is easily damaged. According to electrical code, cables must be protected in these areas, especially when the cables are run over or under ceiling or wall framing. Your electrician can protect exposed plastic-sheathed cable by installing a protective board. Cable that is not secured can become strained. Our electricians can connect loose cables to a metal box or to an approved cable clamp.

Using Loose Outlets and Switches
Loose switches and outlets are not only unattractive, but they’re dangerous. Outlets that are loosely connected will move around, causing the wires to loosen from the terminals. Loose wires tend to overheat, which creates a fire hazard. An electrician can fix loose outlets with rigid spacers that are designed to tighten the outlet connection.

Working on electrical wiring can be extremely dangerous if you are not a trained professional with proper safety gear. At Delta Electric, our certified electricians in San Jose have years of experience working with residential and commercial electric projects. To learn about why you should trust us with your aluminum wiring needs, read on.

Our electricians have been trained in aluminum wiring conversion and repair to ensure all electrical work is done safety and correctly. This, in turn, will give you a peace of mind that’s worth paying for. Delta Electric trains its electricians to conduct thorough inspections, so you can be sure that we are doing the most thorough job possible. Many insurance companies will reject a claim related to electrical wiring if there is not proof that the job was done professionally. We practice three methods of aluminum wiring repair. Call us today to learn more about our aluminum wiring services.