When a circuit breaker trips in your home, it’s usually a sign that you have been using too much electricity in one specific part of your house. Hair dryers, irons, and older appliances can all cause circuit breakers in your fuse box to trip. You can reset your circuit breaker without the help of an electrician serving San Jose , who can also investigate your problem further if your circuit breakers trip on a regular basis.

In order to reset your circuit breaker, all you need to do is locate your fuse box, find the circuit breaker that tripped, and switch it back on. Before you do, you should also shut off whatever appliances you were using prior to the power shutting off. Once you reset it, wait for about 30 seconds to make sure it stays on. Then, go and turn your appliance back on to see if the circuit breaker is delivering power again. You should be able to start using the electrical outlet tied to the circuit breaker without a problem. If for whatever reason your circuit breaker continues to trip, Delta Electric can send an electrical contractor to test it further.

If you are having an electrical problem inside of your home or business, you should not attempt to fix it yourself. Even if you are handy in other areas, you should leave the electrical work to a residential or commercial electrician . Electricians in San Jose can help you do everything from installing a new outlet in your home to completely rewiring the electrical wiring in your business. Read on to learn about the qualifications you should expect to from an electrician.

Valid License and Current Insurance

Before you begin working with a residential or commercial electrician for the first time, you should ask to see a license and proof of insurance. A license will show you that your electrician has obtained the proper education to do electrical work in your home or business. An insurance card will cover you and the electrician in the event of an accident inside of your home or business during an electrical job.

Extensive Knowledge and Experience

When you bring a certified electrician into your home, you want to feel confident in his or her ability to complete whatever job you need done. In order to do this, you need to make sure that you find a professional with knowledge and experience that’s tied directly to the work that you need finished. If you need an electrician to tackle a large job like upgrading your electrical panel or rewiring a portion of your house during a home renovation, check with the electrician about the specific experience that they have with these more complex tasks.

Good References

One of the final things you should do before hiring an electrician is ask for references. Your electrician should be more than happy to connect you with some of their past clients so that you can get a better sense of what you can expect if you hire them. By speaking with references and considering all other factors, you should have no problem picking out the best residential or commercial electrician for your job.

Is one of the circuit breakers in your fuse box tripping on a regular basis? If so, this is a sign that you may need to have an electrician come out to take a look at your electrical panel in San Jose . It’s also a sign that you may need to rethink the way you are using your electricity. In most cases, you can avoid tripping a circuit breaker simply by not running two appliances that require a lot of energy at the same time. Check out a few of the common household appliances that can cause circuit breakers to trip.

Hair Dryers

Most hair dryers are small, so you might not think that they would require much power. However, in order to deliver a steady stream of hot air, hair dryers use a tremendous amount of electricity . If possible, you should use a hair dryer in the bathroom where you have a ground fault circuit interrupter installed. It can cut off electricity for that specific outlet without causing a circuit breaker to trip.

Irons

Much like hair dryers, irons will put a serious strain on your fuse box because they heat up quickly and need a lot of electricity to do it. This is especially true when you turn an iron up to its highest setting. By turning down your iron’s heat, you can scale back on how much electricity it uses.

Fans

While running one fan in your home shouldn’t cause a circuit breaker to trip, you may run into issues if you attempt to run multiple fans at the same time. Most homeowners will run a fan all day long when it gets warm, and this will use up electricity throughout the day and increase the chances of a circuit breaker tripping.

Older Refrigerators

If you have a newer refrigerator, you probably won’t have to worry about it tripping one of your circuit breakers, but older models may present problems. You may need to hire a certified electrician to hook an old refrigerator up to its own circuit breaker to avoid electrical issues.