• Replacing a Faulty Circuit

    A functioning circuit breaker in San Jose will prevent your appliances from using a dangerous amount of energy, but it cannot perform this task unless all of its circuits are working. The good news is that fixing the problem is relatively simple and straightforward. Watch this video clip for tips on replacing a faulty circuit.

    The first step in replacing a faulty circuit is locating the breaker box. Once you have found your breaker box, open it up and turn off the main; this is a very important step that should never be skipped over. Unscrew and remove the panel and loosen the screw that holds the wire, then remove the circuit breaker itself. Now you can simply insert the new circuit breaker and tighten the screws, put the lid back on, and turn on the main breaker. Your circuit breaker should now be functioning at optimal capacity once again.

  • Home Electrical Issues: Why Do Your Circuits Keep Tripping?

    It is tempting to become frustrated with your circuit breaker in San Jose if it continues to trip, but it helps to keep in mind that you are on the same team. Your breaker box can keep you safe in the event that your appliances attempt to draw too much power through your electrical system; instead of hazardous consequences like fires, your system will shut down and recover. Keep reading if you would like to find out why your circuits keep tripping.

    Overload
    Your circuits trip in order to prevent excessive amounts of electricity from flowing and creating too much energy, and Circuit Breakers in San Jose in many cases this occurs when someone attempts to use too many appliances at the same time . It is important to note that circuits and outlets are different things; just because your appliances are plugged into different outlets does not mean that they are operating on different circuits. Always consider the amount of power that any given appliance uses, and make sure you do not attempt to use a variety of other appliances at the same time. Sometimes circuits will trip in this manner because of loose connections, but you should always have a licensed electrician address these issues.

    Ground Fault
    If you are not using too many appliances at the same time, your tripping circuit problem may have to do with a ground fault. When a hot wire touches a ground wire, a ground fault occurs; the same can happen when the hot wire touches a metal outlet box. Diagnosing this problem is simple, as all you have to do is make sure that the hot wire is not touching either of these other elements. A ground fault is one example of a short circuit.

    Short Circuit
    When a hot wire touches a ground wire or metal outlet box, a ground fault occurs; this is because whenever a hot wire touches a hot or neutral wire, a short circuit results. Short circuits tend to be more severe than circuit overloads and can involve melted cords, so in this case it is wise to have a professional electrician take a look at your electrical system.

  • Top Reasons to Call an Electrician

    While there are many household problems that you may be able to diagnose and handle yourself, others tend to indicate the presence of a much bigger problem on the horizon. If you notice any problems that relate to your electrical wiring or circuit breaker in San Jose, a call to your local electrician should be placed immediately. As handy as you may be, electrical problems may compromise the safety of your home. Read on for a look at some of the top reasons to call an electrician.

    Moving Into or Out of a Home Circuit breaker repair and replacement services in San Jose, CA
    Relocating to a new house or apartment can be a positive and exciting experience, but you will need to take care of some things before you can sit back and relax. When you put your home on the market, it is important to make sure that it is as safe as can be and perfectly suitable for a new family. This means that any outlets or fixtures that have given you trouble in the past should be taken care of before moving so that they do not cause problems for the new homeowners. If you are on the other side and you are the one looking for a home, hiring your own electrician to scope it out is never a bad idea.

    Issues with Your Light Bulbs
    Whether you are at home or in your office building, take a moment to consider the lighting. Do the lights flicker? Have you seen one or more bulbs pop? Are some bulbs brighter than other bulbs of the same quality? If these questions bring memories to mind, your electrical system may not be working properly, and it may be showing through your lights.

    Malfunctioning Outlets
    There is no reason to accept the fact that an outlet simply does not work; you paid for your home or office, so you paid for the electrical wiring inside of it. If your outlets do not work the way they should, call an electrician and have the problem addressed. Keep an eye out for appliances that malfunction after consistently being plugged into the same outlet as well.

  • Reasons Your Business May Need Electrical Services

    Operating a business is not a simple task, which is why delegation is one of the most important skills a manager can have. If you would prefer to save your energy to use in conducting your business, you may want to consider hiring an electrician in San Jose to make sure that your electrical wiring is safe and secure. Here is a brief overview of a few reasons your business may need electrical services.

    Accidents involving electrical equipment can lead to very severe damages and even death, so it is important to Electrical Services San Jose ensure that you are working in a safe environment. You can achieve this assurance by having a trained electrician regularly inspect your workplace and identify any potential hazards. Your electrician can also make sure that your electrical system is functioning as efficiently as it should be, which can result in financial savings. An electrician that you hire for a safety inspection can also determine whether your electrical system should be rewired, and he or she can complete that process as well. In the event that you decide to add on to your business by physically constructing new buildings, it is wise to consult an electrician when deciding where to situate outlets and lighting.